Everest – A time lapse film II: How I did it

I’m once again truly humbled to see that my new short: Everest A Time Lapse Film – II is captivating audiences around the world. As always, my goal is to bring to life the majestic beauty of the Himalayas and to inspire others to dream big, discover their passions and explore this beautiful planet we inhabit. Everest and the people of Nepal have given so much to me and this is a very small way of giving something back.

Since then, I’ve returned to Nepal 13 times. I’ve been on 7 Everest expeditions, I’ve failed twice just 500ft from the top, survived two avalanches and an earthquake and stood on top of the world twice, in 2010 and 2013. Every time, with cameras in hand. Perhaps the most meaningful experience of them all was sharing my first summit journey with 20, 000 Canadian students who followed the journey virtually, every step of the way, from the safety of their classrooms. We created a real-time web series and essentially shot, cut, connected with students in their classrooms via Skype daily from as high as 26, 000ft at camp 4. In the end, we made it to the summit in person and virtually – Sean’s spirit with us.

It goes without saying that I’ve fallen in love with Nepal, her beautiful people and her majestic mountains. My latest short film is the culmination of over a decade of shooting in the Himalayas and on Mt. Everest.

What were some of the challenges of shooting Everest – A Time Lapse Film – II?

• Temperatures as low as -20c
• The altitude – as high as 6,400m
• The unexpected cloud cover and moisture
• Batteries dying constantly
• Lack of sleep
• A treacherous Icefall
• A 6, 000m mountain we needed to climb

What were the highest altitudes these shots were captured from?

• Camp 2 on Mt. Everest at 6,400m
• The summit of Lobuche East at 6,119m

What are those glowing lights we see and what is the Khumbu Icefall?

The Khumbu Icefall is a flowing river of ice that moves at the rate of 1 meter per day. It’s deadly, unforgiving and happens to be the gateway to Everest. It’s littered with open crevasses that you need to negotiate by crossing suspended ladders that the Sherpas carry and put in place. The glowing lights we see at the foot of Everest in some of the shots are climbers navigating and negotiating the seracs, crevasses and ice cliffs of the dangerously unpredictable gateway to Everest.

The Icefall by far the most dangerous obstacle on Mt. Everest and you must cross it in order to reach the upper part of the mountain, including camp 1 and 2.

The secondary obstacle worth noting is the fact that we had to summit a 6,000m mountain to gain access to some of the shots you see of Everest – both at the beginning and end of the video. This required full expedition gear: ice axes, crampons, ascenders, fixed lines, etc. Below is an excerpt from my blog:

“We climbed high above the clouds to 6,119m and set up camp for three nights on the summit of Mt Lobuche East waiting for a glimpse of Everest from one of the best ‘camp spots’ in the Himalayas. We patiently waited for two nights for the skies to break and finally, they did. A golden wash of light splashed across the world’s tallest peak as 4 Canon DSLR’s clicked away. By midnight, there were electric storms to the north/east in Tibet and unfortunately we never had a chance to capture the Milky Way as the clouds eventually came in, but not before capturing the dancing stars and the vibrant purple and green hues of the wondrous night skies above the Khumbu and Everest region.

The altitude has a debilitating effect on the human body and so it becomes a substantial effort on the part of many to establish this camp, carry the gear to the summit and camp out up there long enough to bring back some of these images. We used stoves to melt the snow and feasted on dehydrated meal packs (think pasta in a bag) and noodle soup.

What gear did I use to shoot this?

All Canon cameras on this one. Canon Canada was kind enough to lend me some of the equipment below. I use Canon because of their weather sealing and I happen to be a big fan of the aesthetics. I’ve been to the summit of Mt. Everest twice and have seen many cameras (and cameramen!) fail up there. The 5D Mark 3 is a beast and a workhorse at extreme altitude and in the cold. I went with what I knew and what I was certain would withstand the elements while producing outstanding images.

• 2x Canon 1DC’s
• 2x Canon 5D Mark 3’s
• 1x Canon 5Dsr
• 2x Canon 16-35mm 2.8
• Canon 11-24mm f4
• Canon 24mm 1.4
• Canon 70-200mm 2.8
• Canon 14mm 2.8
• 30 Canon batteries
• Yeti 800 Solar Generator
• Emotimo pan/tilt motorized head
• 4 tripods
• 4 Intervelometers
• 4 x 128 G CF cards
• 10 x 32G CF cards
• 16 x 4TB Lacie rugged hard drives

What software and gear did I use to edit this together?

• Still images were edited in Adobe Lightroom
• Assisted at times with LR Time-Lapse (genius program!)
• Quicktime MOV’s created in LR TimeLapse
• Final edit assembled in Adobe Premiere
• Macbook Pro – 15inch – 2014 model

All of the images were processed on location while at Mt. Everest basecamp at night, under a headlamp, with a down-jacket on and in -25c temperatures.

The original resolution of the images are between 5-6K

How many still images did I capture and how long did this take?

• 108 total time-lapses and set ups over two years in the Himalayas
• 44,069 still images created
• 26 shots, 1,896 stills or 2 mins and 18 seconds make the final cut

That means 82 shots or 42,173 stills are on the cutting room floor!

How did you keep the batteries warm?

Duct tape, hand warmers and hot water bottles. Low tech and affordable. 😉

Who was on your crew?

I worked closely with my friend and camera assistant Pasang Kaji Sherpa on this project. He was my right hand man in making sure I had what I needed to pull this off. We hired a small team of porters who work with me year after year, men I consider great friends. I have trained them to work with my cameras and lenses and compensate them all very well for their time. I also do my best to make sure we’ll all having a blast during production.

What locations are these images shot from?

• Summit of Mt. Lobuche East
• Camp 2 on Mt. Everest
• Camp 1 on Mt. Everest
• Everest basecamp (near the entrance)
• Khumjung Village
• Namche Bazaar
• Pheriche Village

Can you share some of your settings with us?

Any tips on how to capture the Miky Way at Mt. Everest basecamp?

The magic happens around 2am at Everest basecamp.

• Look up high above Nuptse on a clear night and you’ll notice the Milky Way with your naked eye
• Place your DSLR camera on a tripod
• Point your camera using your widest lens in the direction of the icefall using manual settings.
• Be sure to leave ample space in your frame above Nuptse to capture the Milky
• Focus on the summit of Nuptse (easier to do this earlier in the evening while there is light)
• Set your ISO to approximately 3200 (you may need to go higher than this)
• Open up your aperture as wide as it will go, ideally f2.8 if possible
• Lower your shutter speed to 15 seconds and trigger the camera
• Wait 15 seconds and watch the magic unfold!
• This what you should be able to achieve.

What would we never know about this film by watching it?

I’ve kept these images hidden for almost 4 years. They were created in 2014 and 2015 – the two deadliest seasons in Everest history. Many lost their lives and I was at ground zero both years. I’m not sure I’ll ever un-see what I saw in those two seasons both during and after the avalanches. Somehow I felt keeping these images hidden showed respect for the fallen. The images at camp 2 were created right after the 2014 avalanche that claimed the lives of 16 Sherpas. We were trapped above the area where 16 died at Camp 1 and 2 and had to remain in place for three days, unable to assist in the evacuations. Shooting the night skies helped with the helplessness we all felt. In 2015, much of what you see this video was captured days before we got hit by the avalanche at basecamp during the Earthquake. No one can ever be prepared for such devastation. It’s taken a long time to work through the loss and perhaps somehow, releasing these images is my way of fully letting go and remembering the beauty, the wonder and freedom that comes along with climbing the world’s tallest peak.

Any final words for an aspiring adventurer or creator?

I’d say that the magic of today’s technology is that we can all create films like this with very minimal technology. An affordable DSLR or mirrorless camera, a decent lens, an intervelometer and some processing and editing software is all that you need. What’s also required is the willingness to travel outside of your comfort zone into these kinds of beautiful environments. 13 years ago I had never even slept in a tent and look where I ended up. Who knew!

I do what I do because I hope in a small way I inspire you to live your own version of your best life. Your life of adventure in whatever shape or form it takes. Life on your terms is an extraordinary life. It can be shaped and it is possible. It often takes a certain level of risk to arrive, but damn is it worth it. Shoot for the stars my friends!

For more inspiring imagery find me on Instagram

I also share my adventures on my Facebook Page

You can also join my list to receive my latest videos, photos and updates from the field.

Elia